From my last post, I build a second half of my 3' by 3' modular table using an identical technique: a 2' by 4' piece of MDF board cut into sections, painted, covered with grass paper, and then assembled. I made a slight variation in the layout for diversity's sake.
When the two pieces are put together, they make a variety of permutations.
Now I could stop here (and may take a little break for a few days) but I've been considering adding additional detail: sidewalks, etc. What do you think?
I've been thinking for a long time, maybe over a year, about creating a small gaming table upon which to play All Things Zombie or other modern-ish game. For my previous ATZ campaign, I played on an old 4' by 4' table that I made for Mordheim ages ago. It's big, a bit unwieldy, and is pretty uniformly green.
What I wanted was a 3' by 3' square table which would come in two halves (18 inches by 36 inches), and have built into it roads, sidewalks, etc. on which I could arrange buildings. I considered getting a pre-made mat, but those are expensive and I could never find exactly what I want. Printing out a cardstock table would offer lots of two-dimensional detail, but would cost a fortune in printing costs (and also be two dimensional). So I decided to make my own. I'm pretty crafty, but regardless my plan wouldn't be complicated. After a lot of sketching on the mist-covered door of my shower stall, I finally decided to move on my plan.
So I thought I would share it with you, step by step. I'll be building the first half, just to see if it works before I build the second. Here's the stuff you need for the first half:
a 2' by 4' MDF board
black spray paint
green grass-textured paper (the kind you use for model train layouts)
First, get the guy at Home Depot to cut your MDF sheet. You want to cut one foot off the short end, then six inches off the long end of the large piece, then cut the small side piece in half. This will leave you with four pieces:
18" by 36"
12" by 24"
6" by 18"
6" by 18"
If that sounds unclear, here's a helpful photo of the pieces.
The large piece will make up the base of the table. On the big piece, spray black on the part where the road will go. The road will be about six inches across. Here's a photo of how I wanted it to look.
Now, take the 12" by 24" piece and cut a piece of the grass paper to make the shape. Spray adhesive on the piece and carefully lay the grass paper on top of it (weigh it down with some odd pieces of plywood) and let it dry for several hours. Do the same for the 6" by 18" piece. Save the last piece for the next half of the project.
Attach the two grassy pieces of MDF to the base around the painted roads, creating a layout like I've shown.
Now you have a roughly three-dimensional layout that's pretty inexpensive and easy to build. I'm going to basically do a second one in a similar fashion to finish up the table, plus add some additional detail, as you'll see. Stay tuned, and comments always welcome!
I've been painting up the Walk of the Dead supplement of miniatures for the board game Zombicide to use in a possible ATZ relaunch. Walk of the Dead features 24 miniatures which are three sets of eight different poses. I showed two of the miniatures in my last post, here are the others.
There are some nice variations between very generic, male zombies and very character-ful male and female ones. Two of the zombies are all-out running, which strikes me as being a little antithetical to my classic zombie movie tastes, but sprinting zombies are all the rage these days (no pun intended).
Now to come up with some color variations for the other 16 zombies in the set, and I'll have replenished my zombie horde with some good looking fellows!
Holy cow! Has it been over six months since I posted something here? Well, the release of Zombicide and the supplementary boxes of cheap plastic zombies have got me back into it again, so here are two test miniatures I did to see how they would look. While the main game is pricey with a lot of stuff I don't need for All Things Zombie, the booster sets, including "Walk of the Dead" which is where these are from, are much more affordable, even if there are only so many poses. I figure I can paint them up differently and hopefully it won't be too obvious.
I've been thinking about re-launching the whole campaign from scratch, since it has been so long since the last update (much like Vampifan did). What do you think?